Roofing cost guide

Roof Replacement Cost in Texas (2026)

By the HomePriceFacts Research Team · Last updated: November 9, 2026 · Prices checked against published Texas cost data

Most Texas homeowners pay between $6,000 and $20,000 to replace a roof in 2026, with the average for a 2,000 sq ft roof at about $13,000. Where you land inside that band depends less on the state than on your city, your material — and whether a hailstorm just rewrote your local market.

Quick answer: what it costs in 2026

Roof replacement in Texas (installed)LowTypicalHigh
Full replacement, 2,000 sq ft roof (HomeAdvisor Texas data)$6,000$13,000$20,000
Dallas–Fort Worth, typical project (Angi data)$5,960$10,054$14,203
Houston, typical project (Angi data)$6,712$9,752$13,123
Architectural shingles, installed per sq ft$4.50$6.00$7.50

The two datasets measure different things: HomeAdvisor's Texas page prices a fixed 2,000 sq ft roof, while Angi's city pages average whatever projects homeowners actually completed — smaller roofs included. That is why the city averages sit below the state benchmark without either being wrong. Premium materials break out of the band entirely: the same 2,000 sq ft roof in clay tile or slate can run $45,000.

Estimates based on published Texas data from HomeAdvisor and Angi city cost pages, checked November 9, 2026. Your local price will differ — see the city table below and our research method.

Texas is not one roofing market. A Dallas roof is priced in the middle of the country's worst hail corridor; a Houston roof is built against hurricane wind and some of the heaviest rainfall in the US; an El Paso roof mostly fights sun. Labour rates differ too — Texas roofers work for roughly $2–$5 per square foot of the installed price, and the metro markets sit at the top of that band while rural areas sit at the bottom. This guide uses the state benchmark first, then breaks the price down by city and by material, so you can locate your own roof before the quotes arrive. For the national picture, see our main roof replacement cost guide.

One Texas-specific warning before the numbers: the state has no statewide roofing licence, and every major hailstorm draws travelling crews who knock on doors, offer to handle the insurance claim, and vanish before the first leak. The prices below are what established Texas companies charge for real work — a quote dramatically under them, from a company with no local address, is not a bargain. It is the most common way Texas homeowners lose money on this project.

What the price normally includes

Roof replacement cost in Texas by city

CityPublished rangeTypical averageWhat shapes the price
Dallas–Fort Worth$5,800–$13,200$9,500–$10,054Hail corridor — impact-resistant specs are common, and post-storm demand spikes prices
Houston$6,400–$12,600$9,500–$9,752Wind-rated installations, heavy rain, humidity-related decking damage
Austin$5,400–$12,100$8,750Hill Country hail exposure; slightly softer labour market than DFW
El Paso$5,000–$9,800$7,400Lower labour and living costs; UV and heat are the main enemies

Ranges and averages are HomeAdvisor's Texas city data; Angi's independent city datasets put the Dallas average at $10,054 and Houston's at $9,752, inside the same bands — the two publishers agree on the shape of each market even where their averages differ by a few hundred dollars. San Antonio and the Gulf Coast cities generally price between Austin and Houston; Corpus Christi and other coastal jobs add windstorm-certification requirements discussed below.

Cost by material (Texas, installed per sq ft)

MaterialPer sq ftPer square (100 sq ft)Texas notes
Asphalt shingle (3-tab)$2.50–$4≈ $325Cheapest option; weakest hail and wind performance
Architectural shingle$4.50–$7.50≈ $600The Texas default — thicker, better wind and hail resistance
Wood shakes$5–$10≈ $750Poor fit for wildfire-risk and storm-heavy areas
Metal$6.50–$18≈ $1,225Excellent hail and heat performance; long life
Concrete tile$7–$10≈ $850Heavy — deck reinforcement may be needed
Clay tile$10–$26≈ $1,800Durable in heat but fragile under hail impact
Slate$15–$30≈ $2,250Premium and heavy; specialist installation

Material rates are HomeAdvisor's Texas table. Size works the same way it does nationally: at HomeAdvisor's Texas averages, a 1,000 sq ft roof runs about $6,500, a 1,500 sq ft roof about $9,800, and a 2,200 sq ft roof about $14,300 — material choice moves you around those anchors.

What drives the price up or down in Texas

Hail, and the Class 4 question

North and Central Texas sit in the most hail-prone corridor in the country, and it shows in the spec sheets: many Texas quotes default to impact-resistant architectural shingles. Class 4 shingles cost more per square than basic architectural, but many Texas insurers discount the premium for them — ask your insurer for the number before you decide, because the discount, not the shingle, is often what makes the upgrade pay.

Heat, sun and ventilation

Texas heat ages asphalt from above while attic heat attacks it from below. Inadequate attic ventilation is a quiet roof-killer across the state, and a good replacement quote addresses intake and exhaust venting, not just the surface. Metal and light-coloured materials reflect more heat and are gaining share in the southern half of the state for that reason.

Coastal wind requirements

Along the Gulf Coast, roofs are a wind problem before they are a rain problem. Homes in designated coastal counties generally need a windstorm certificate for their roof to qualify for Texas Windstorm Insurance Association coverage, which means the installation has to be built — and inspected — to the wind standard, not just nailed down. Budget for the rated materials and the inspection rather than discovering the requirement at claim time.

Storm-season demand

After a major hail event, every roofer in a metro is booked and prices firm up; the same job quoted in a quiet month can come in lower. If your roof is weather-tight and the replacement is planned rather than urgent, timing the job away from the post-storm surge is one of the few genuine savings available.

Ways to keep the cost down

Before you hire: get at least three written quotes for the same scope, confirm the contractor is locally registered and insured, and never pay the full amount up front. Prices on this page are planning estimates, not quotes — the disclaimer explains the limits.

Frequently asked questions

How much does a roof replacement cost in Texas on average?

HomeAdvisor puts the Texas average at $13,000 for a 2,000 sq ft roof, with most homeowners spending $6,000–$20,000. Angi's city datasets, which average typical projects rather than a fixed roof size, land lower: about $10,054 in Dallas and $9,752 in Houston. Both are measuring real projects — the difference is what is being averaged.

Why is my Texas roofing quote higher than the state average?

Usually one of four things: a bigger or steeper roof than the 2,000 sq ft benchmark, a material upgrade (metal and tile multiply the per-square-foot rate), impact-resistant or wind-rated specifications, or post-storm demand pricing after a hail event. Ask for the per-square price and the measured area so you can see which one it is.

Does Texas require roofers to be licensed?

Texas has no statewide roofing licence. Many cities — Dallas, Houston, Austin and San Antonio among them — require local registration, and permits are required for roof work. Because there is no state licence to check, verify the company's physical address, insurance and local registration yourself, and be wary of door-to-door crews that appear after storms with no local presence.

Are impact-resistant shingles worth it in Texas?

In hail country, often yes. Class 4 impact-resistant shingles sit at the top of the architectural price band rather than in a different price universe, and many Texas insurers offer a premium discount for them. Ask your insurer what the discount is worth on your policy before you decide — over a 20-year roof life it can repay much of the upgrade.

How long does a roof last in Texas?

Depending on material, published guides put Texas roof life anywhere from about 20 years for basic asphalt to 100 or more for slate and clay tile. Texas heat and hail shorten asphalt's life versus milder climates, which is why architectural shingles, metal and concrete tile are the state's common long-life choices.

Do I need a permit to replace a roof in Texas?

Yes — Texas roof work requires a permit, and plans may need approval before work starts. Your roofing contractor normally pulls it and should include the cost in the bid; if a quote has no permit line, ask why before you sign.

Related cost guides

Sources: HomeAdvisor, "Average Roof Replacement Costs in Texas" (state average, city and material tables); Angi roof replacement cost pages for Dallas (average $10,054) and Houston (average $9,752), updated August 2026. Full source list and methodology: How we research. Spotted a price that looks wrong in your area? Tell us — we re-check reader-flagged figures first.